0.2-2Liter Water Bottling Machines 3-in-1

3-IN-1 Bottle Water Washing Filling Capping Machines

Capacity Scale of Bottle: 350—2000ml;
Diameter Scale of Bottle: 50mm–90mm;
Height Scale of Bottle: 160mm-310mm;
Drink Kind: Mineral Water, Pure Water, Spring Water.

Different type

16-12-6 Bottle Water Washing Filling Capping Machine,Production:4000-5000 bottles per hour
18-18-6 Bottle Water Washing Filling Capping Machine,6000-7000 bottles per hour
24-24-8 Bottle Water Washing Filling Capping Machine,8000-9000 bottles per hour
32-32-10 Bottle Water Washing Filling Capping Machine,10000-12000 bottles per hour

General description

3-IN-1 Automatic water bottling machines collects washing, filling and capping together.It is mainly suitable for washing filling and capping round or square polyester bottles.It is researched and developed on the base of importing ,assimilating and absorbing the advanced technology of Germany in 1995. Finished bottled water driven by the transmission motor. It is high automation, compact structure, beautiful appearance, convenient and simple operation, safe and reliable, continuous stable production and others. It is mainly used for washing, filing, and capping non-gas liquid, such as mineral water, pure water. It consists of bottle lifter, bottle unscrambler, air conveyor, rinser-filler-capper monobloc, cap lifter, light checking box. Besides, our water filling equipment is able to meet different production requirements.

Main configuration:

1) Material of filling valve and liquid tank is 304
2) Main motor:National brand
3) Sliding bearing:Taiwan
4) Frequency inverter: MITSUBISHI
5) Touch screen:Taiwan
6) PLC:MITSUBISHI
7) Pneumatic components:Airtac
8) Seals:National brand
9) Photocell switch and proximity switch:Taiwan

Video

Works as follows:

Bottles are fed from conveyor chain into the filling machine monoblock via star wheel. Bottle clamp installed on the rotary wheel of the rinse will grip bottle mouth and make a 180° turn along a guide track to face the bottle mouth downward. In designated section of the rinse, rinsing water will jet out from special nozzles to flush bottle inside wall. After rinsing and dripping, bottles gripped by bottle clamp will make another 180° turn along a guide track to resume bottle mouth facing up position. Clean bottles are discharged out of the rinse by a star wheel to feed the filler. After entering the filler, bottles are retained by neck supporting carrier plates, which are actuated by bottle carrier mechanism to raise them to engage with filling valves. Filling valves are opened by bottle presence signals. After finishing filling, valves are closed by valve closing mechanism to further stop venting to complete the filling process. Bottle carrier mechanism is lowered by a cam to disengage filled bottles with filling valves. Then bottles are transferred into the capper by a neck handling star wheel. Anti-rotation blades on capping heads will seize the bottleneck to prevent it from rotation and hold it in a upright position. The twist-on capping head will make revolving and rotating movement along with the machine to finish the complete capping process of cap picking, placing, twisting, and disengaging under the control of a cam. A discharge star wheel discharges finished bottles onto discharge conveyor belt to be conveyed out of the filling monoblock.